'New tailor-made biopolymers produced from lignocellulosic sugars waste for highly demanding fire-resistant applications'

Lignocellulosic fiber reinforced composites: Influence of compounding conditions on defibrization and mechanical properties (pages 1227–1238)

This work describes a systematic study of the compounding conditions by twin‐screw extrusion on the defibrization process that modulates the fiber aspect ratio and in turn the mechanical properties. Composites made of polycaprolactone reinforced by 20% hemp fibers were prepared by melt blending. The influence of the extrusion parameters (screw speed, feed rate, barrel temperature, and screw profile) and the initial fiber moisture content on both the fiber dimensions and the mechanical performance of the composite was investigated. The fiber aspect ratio increased when the fibers were water plasticized, principally at a higher feed rate and under a moderated extrusion temperature. The screw speed slightly influenced the fiber dimensions. Flow modeling was used to estimate the specific mechanical energy provided to the fibers, which ranged from 300 to 1700 kWh/t. Independent of the screw profile, a decrease in fiber length with an increase in energy was observed. The evolution of the fiber length and aspect ratios with respect to energy can be accurately described by an exponential function. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

View Full Article (HTML) Get PDF (1351K)

» Author: Johnny Beaugrand1,2,*, Françoise Berzin1,2

» Reference: Journal of Applied Polymer ScienceSpecial Issue: FibersVolume 128, Issue 2, pages 1227–1238, 15 April 2013

» More Information

« Go to Technological Watch

This project has received funding from the European Unionís Seventh Framework Programme for research, technological development and demonstration